Installation:

1. Each kit comes with an optional mount kit (front receiver hitch), push frame, and plow blade. If you are using a rear mount, skip to #4.

2. Mount the front receiver hitch to the front of the vehicle. Each mount kit is vehicle specific.

3. Installation takes between 30 minute and 1 hour depending on your technical skill and the specific front hitch.

4. Slide the push frame into the front receiver hitch.

5. Secure the push frame with the hitch pin.

6. Once you have secured the push frame you are ready to attach the SnowSport Plow.

7. Simply lift one end of the blade at a time onto the holders and secure with snap pins.
 
8. You're done!

Back to Snow Plows